双金属耐磨复合钢板特点 |
添加时间:2018/5/7 15:24:06 浏览次数: |
双金属耐磨复合钢板特点 Characteristics of bimetal wear-resistant composite steel plate 高耐磨性能:采用国际耐磨复合钢板通用的合金体系,具有优异的抗磨粒磨损性能,采用冶金熔合的方法,耐磨层与基材实现冶金结合。耐磨层厚度3.5~12mm,耐磨性大大高于热处理耐磨钢、铸造耐磨铸铁,抗磨损能力也大大高于喷焊或热喷涂方法; High wear resistance: the general alloy system of international wear-resistant composite steel plate has excellent wear resistance, metallurgical fusion method, wear resistant layer and base material to realize metallurgical bonding. The thickness of wear resistant layer is 3.5~12mm, and its wear resistance is much higher than that of heat treated wear-resistant steel and cast wear-resistant cast iron, and its wear resistance is much higher than that of spray welding or thermal spraying. 抗冲击:由于耐磨复合钢板的基板采用塑性很好的低碳钢板,可在受冲击的过程中吸收能量,因而,耐磨复合钢板具有很强的抗冲击性能和抗裂性能,可以应用的振动、冲击较强的工况条件下; Impact resistance: as the base plate of wear-resistant composite steel plate adopts very good plastic low carbon steel plate, it can absorb energy during the process of impact. Therefore, the wear resistant composite steel plate has strong impact resistance and crack resistance, and can be applied under the condition of strong vibration and strong impact. 易于加工:耐磨复合钢板可以制成标准尺寸的钢板,重量轻,加工方便灵活。由于采用软质基板,因而可以向内冷弯成形,可以用等离子弧、碳弧等热源切割。可以拼焊成型,使现场焊接工作变得省时、方便。因而这种材料符合目前国际制造也采用以焊接结构代替铸造结构,降低结构自重的主流; Easy to process: wear resistant composite steel plate can be made into standard size steel plate with light weight and convenient and flexible processing. Due to the adoption of soft substrate, it can be cold formed internally, and can be cut by heat sources such as plasma arc and carbon arc. It can be assembled and welded to make the field welding work time-saving and convenient. Therefore, this material conforms to the current international manufacturing, and also uses welding structure instead of casting structure to reduce the mainstream of structural self weight. 高得性能价格比:使用耐磨复合钢板制造机件的造价较普通材料有所提高,但机件的使用寿命增长,综合考虑维修费用、备件费用和停机损失,其性能价格比比普通材料高2—3倍,单位面积所需费用仅为使用同种成分手工焊条的二分之一; High performance price ratio: the cost of making machine parts made of wear resistant composite steel plate is higher than that of ordinary material, but the service life of the machine parts is increased, and the cost of maintenance, spare parts and stop loss are taken into consideration, its performance price is 2 to 3 times higher than that of ordinary material. The cost per unit area is only the manual welding electrode using the same component. A half; |
上一页 双金属耐磨复合钢板技术分析 |
下一页 双金属复合管形成基本原理 |
Copyright © 技术支持:遨游网络